Skip to main content

WM Painting and Decorating

Commercial Roof Painting in Wollongong

A commercial roof is the largest surface on your building and the one nobody looks at until it leaks. We coat sound metal and Colorbond roofs on warehouses, shops, schools and strata buildings, and we say so plainly when a roof needs replacing instead. Homeowners should see our roof painting and spraying page, while this page covers commercial roofs.

Licensed & Insured

Licensed and insured painters with 10+ years in the trade.

Safety First

Roof access is planned around the surface, the edges and the weather.

Coastal Conditions

Salt air and weather shape the preparation and coating choice.

Free Quotes

A roof inspection and a written scope before any work starts.

COMMERCIAL ROOF COATING

Coating Metal Roofs on Commercial Buildings

Metal roofs on commercial buildings are big, exposed and rarely inspected, so they weather in the sun, rain and salt air for years before anyone notices, and a coating can extend a sound roof’s life and refresh its look. It cannot fix a roof that is structurally failing.

Colour Consultation

Choosing a roof colour that suits the building and the local heat? We can talk through light and dark options and what each means for the coating system.

Commercial Roof Painters for Owners and Managers

Roof work involves more risk than most painting, so the process starts with an inspection. We look at sheet condition, rust, laps, fixings, gutters and penetrations, then write a scope that separates what a coating can fix from what it cannot. Roofs across Wollongong, Shellharbour and Macarthur face different conditions, from salt air on the coast to hot, exposed estates inland.

WM Painting & Decorating is licensed and insured, with 10+ years in the trade. Our Ingenia Holidays Lake Conjola amenities project page is a useful reference for repainting exposed steel and timber near the coast. Strata committees can also read our strata painting page for roofs on residential buildings.

If you are unsure whether to coat or replace, contact us and we will inspect the roof first. Our broader commercial painting page lists the other building types we paint.

What you can expect from us:

Roof Coating by Stage

A coating only works as well as the roof beneath it, so each stage has a job to do.

We inspect the roof, note rust, laps, fixings and gutters, and tell you whether a coating makes sense. If sheets are corroded through, we say so before anything is quoted.

The roof is washed to remove dirt, salt and moulds, loose coating is removed and rust is treated. Minor repairs to laps and fixings are made so the new coating bonds to a sound surface.

Primer goes on where the manufacturer calls for it, followed by the agreed topcoats. We watch the weather closely, because wet or very hot sheets can ruin an application.

We record the products and colours used and suggest a wash and inspection routine, so small problems get fixed before they spread.

Light-coloured roof with reflective coating designed to reduce heat absorption

Commercial Roof Coating: Straight Answers

What is a cool roof coating?

A cool roof coating reflects more of the sun’s energy than an ordinary dark roof, so the surface runs cooler. The Dulux AcraTex Cool Roof Commercial product page says the water-based coating suits concrete and metal roofs, including aged Zincalume and Colorbond, and describes excellent total solar reflectance with up to 90 percent of solar energy reflected.

The same page lists low sheen to reduce glare, mould and algae protection, and low dirt pickup. It also says new Colorbond may need a primer first. We follow the data sheet for every product we use.

Will painting a Colorbond roof affect the warranty?

BlueScope’s technical bulletin TB-2, Overpainting and restoration of exterior BlueScope coated steel products states that overpainting Colorbond, Zincalume or zinc-coated steel will void any warranties issued by BlueScope. It says the most suitable paint type for overpainting is generally water-based acrylic, and that minor scratches under 2 mm wide that are unnoticeable from ground level should be left alone.

If your roof is still under warranty, check the terms with BlueScope before any coating is applied. We talk through the trade-off with you, because the warranty position should be a conscious decision.

How is a roof prepared before coating?

TB-2 describes washing the surface with household detergent and water and a soft bristle broom or mop, then rinsing thoroughly with fresh water and letting it dry. Heavily weathered or chalky surfaces, and areas with rust, need more work than a newly installed roof.

We follow the coating manufacturer’s data sheet for the specific roof, since each product has its own surface preparation and primer requirements. Gutters, flashings, ridge caps and skylight surrounds are included in the scope, because water that gets behind one failed flashing can undo a whole roof coating. We also photograph the roof before and after, so you have a clear record of its condition. Where rust has eaten through sheets, repair or replacement comes first.

How is roof work kept safe?

SafeWork NSW’s Work on roofs code of practice for commercial and industrial buildings covers hazards such as falls from edges and through weak or fragile roof surfaces. It says an inspection of an existing roof should be conducted by a competent person before work, and that the risk of a fall should be dealt with by working on the ground or on a solid construction where possible.

We plan edge protection, access and exclusion zones for each roof. If a roof is too fragile to walk on safely, we say so, and roof sheet replacement is arranged via a specialist contractor.

When does replacing a roof beat coating it?

Replacement makes sense when sheets are rusted through, fixings have failed in many places, laps leak despite repairs, or the roof surface is brittle or fragile. A coating cannot add strength, close holes or fix a roof that has reached the end of its life.

A coating is a good choice for sound sheets with surface wear, fading or early rust. Our inspection tells you which side your roof falls on, and we would rather tell you early than coat a roof that will fail.

Our Simple Process

How We Work

01

Free Quote

Tell us about the building, the roof type and any leaks or warranty questions.

02

Consultation

We inspect the roof, check sheets and fixings, and write a clear scope.

03

Preparation

The roof is washed, rust is treated and repairs are made before coating.

04

Professional Painting

Primer and coats go on in suitable weather, with safe access throughout.

05

Final Inspection

We record the products used and suggest a wash and inspection routine.

Our Work

Our Painting Work

Planning a Roof Coating?

Call 0434 432 267 or send us a message for a free quote on commercial roof painting in Wollongong and the Illawarra.

FAQ

Frequent Answer Questions

Our roof painting and spraying page covers homes and residential roofs. This page covers commercial roofs on warehouses, shops, schools and strata buildings, where larger areas, access and safety need more planning.

Sometimes. Small leaks at laps or fixings can be repaired before coating, but widespread leaks or corroded sheets usually mean replacement is the better option. We tell you after the inspection.

Sound metal roofs, including aged Colorbond and Zincalume, are the most common. Roofs with asbestos, heavily corroded sheets or fragile surfaces need specialist advice first.

Roof sheet replacement is arranged via a specialist contractor. We can coordinate the timing so painting of gutters, flashings and eaves follows the roofing work.

Lighter, reflective colours reflect more of the sun’s energy than dark ones. Cool roof coatings are designed to do this, though results depend on the product, the colour and the building. We recommend checking the manufacturer’s data for your chosen colour.

We cover the Illawarra, Macarthur and parts of Sydney. See our pages for Wollongong, Shellharbour, Macarthur and the Kiama area.