Warehouses, factories and workshops take a hard life, and paint is often the cheapest line of defence for the steel and concrete inside them. Our industrial painting in Wollongong covers walls, steel portal frames, purlins, roller doors and safety colours, planned around your operations. Other business types sit under our commercial painting service.
Licensed and insured painters with 10+ years in the trade.
Work is staged so production, deliveries and forklifts keep moving.
Salt air and industrial fallout shape product choice and preparation.
A site visit and a written scope before any work starts.
Industrial sites ask a lot of a coating, and the building is usually too busy to stop for a repaint. Dust, forklift knocks, washdowns, condensation and salty air all test the paint, and a good result starts with honest preparation.
Need safety colours, zone colours or a brand scheme that works on a large industrial wall? We can test samples on site before the full run.
Industrial repaints are won or lost on access and timing. Forklifts, trucks and production lines all need room, so we agree work zones, exclusion areas and start times with your site manager before any ladder goes up. Estates around Wollongong, Shellharbour and Macarthur each have different access rules, and the Sutherland Shire has a mix of light industrial units and workshops.
WM Painting & Decorating is licensed and insured, with 10+ years in the trade. Our Ingenia Holidays Lake Conjola amenities project page shows steel and timber beams and epoxy enamel handrails repainted in lake and coastal air, which is a useful comparison for exposed steel.
Maintenance is cheaper than replacement, and small repairs done early stop rust from spreading under the paint film. Our guide on how often a commercial building should be repainted explains why a regular inspection beats waiting for failure, and you can contact us to arrange a site visit.
What you can expect from us:
Industrial work is staged so the site keeps running while the coating goes on.
We walk the site, look at the condition of the steel, walls and doors, and note rust, damage, leaks and previous coatings. The scope lists each surface, the preparation and the system, so you can compare quotes fairly.
High walls, purlins and roller doors need planned access. We choose platforms, towers or other methods to suit each area and agree exclusion zones with your site manager.
Surfaces are cleaned and repaired, loose coatings are removed and rust is treated before primer goes on. Coats are applied in the agreed order, with film thickness and cure times respected.
We record the products and colours used and suggest an inspection routine, so small failures get fixed before they spread.
Protective coatings are paint systems designed to slow corrosion on steel by keeping moisture, salts and oxygen away from the metal. The Dulux Protective Coatings guide to AS/NZS 2312.1:2014 explains that unprotected mild steel corrodes in the presence of moisture, salts, oxygen and other contaminants, and that the closer the steel is to the coast, the higher the corrosion rate.
A typical system uses a primer, one or more build coats and a topcoat for UV protection. The right system depends on the environment, which is why we work from a written scope and the manufacturer’s data sheets.
The Dulux guide describes atmospheric corrosivity categories from very low to extreme, and it places industrial regions within 1.5 km of a plant in the high category, which is the same band as parts of the coast. It also notes that areas close to ocean surf and salt spray sit in higher categories than inland sites.
For sheds and frames near the coast or heavy industry, such as around Port Kembla, we assume salt and fallout are present. That means thorough washing before painting, careful treatment of rust and edges, and a realistic maintenance schedule. Heavy protective coating work or abrasive blasting is arranged via a specialist contractor.
The Dulux maintenance guide on DuSpec+ recommends regular inspection of commercial and industrial steelwork coatings at least yearly, with more frequent checks in high-wear or high-moisture areas. It names angles, bolted connections, weld seams, sharp edges and trusses as the first places to look.
A separate Dulux Protective Coatings note on cleaning and maintenance of coatings suggests a routine of around three months, six at most, with more frequent maintenance in marine, polluted or corrosive environments. Washing off salt and dust is a cheap way to extend coating life. For a busy site, that can be as simple as a scheduled wash-down of the exposed steel and doors, with a short inspection report afterwards that records where rust or damage has started so it can be fixed in the next maintenance window.
SafeWork NSW’s working at heights guidance says working from the ground or solid construction is always the safest option, then fall-prevention devices such as scaffolds and elevating work platforms, with administrative controls used last. A safe work method statement is required for construction work where a person could fall more than two metres.
We choose access to suit each wall, frame and door. Work on or near roof sheeting is a separate matter, and roof sheet replacement is arranged via a specialist contractor. Our commercial roof coating page covers coatings on sound metal roofs.
Older industrial buildings may have lead in early paint layers. SafeWork NSW’s lead notification page says lead risk work, which includes removing lead paint, must be assessed, and that if you cannot tell whether a process is lead risk work you should treat it as such and notify SafeWork up to seven days before the work starts.
If a test shows lead, we stop and discuss the options with you. Lead paint removal is arranged via a specialist contractor, and we only coat over sound, stable paint with the right preparation.
Tell us about the site, the surfaces and your production or delivery hours.
We inspect the site, check the steel and walls, and write a clear scope.
Surfaces are washed, repaired and primed, with machinery and stock protected.
Coats go on in the agreed zones, with safe access and tidy-ups each day.
We walk the site with you and record the products, colours and a maintenance plan.
Call 0434 432 267 or send us a message for a free quote on industrial painting in Wollongong and the Illawarra.
Often yes. We agree work zones, exclusion areas and delivery windows with your site manager, and we move through the building in stages so forklifts and trucks keep a clear route.
Yes. Roller doors, personnel doors, columns and portal frames are common jobs. We clean, treat rust, prime and apply the agreed system, with the right access for height.
We paint safety colours on bollards, rails and structures. Floor line marking and traffic markings are arranged via a specialist contractor.
Abrasive blasting and chemical-resistant linings are arranged via a specialist contractor. We handle cleaning, repair and the standard protective paint systems.
Fire-rated and intumescent coatings are arranged via a specialist contractor, since they need specific certification and application control.
We cover the Illawarra, Macarthur and the Sutherland Shire. See our pages for Wollongong, Shellharbour, Macarthur and the Sutherland Shire.